Warp firmware 1.20:
Warp Audio Card specification:
How to connect the Amiga 500 sound with:
WARP 1260
Guide 1260
Guide 1260
Warp Quick Start Guide — Read it before you ask any technical questions, please!
Warp firmware 1.20:
Warp Audio Card specification:
How to connect the Amiga 500 sound with:
WARP 1260
Warp firmware 1.20:
Warp Audio Card specification:
How to connect the Amiga 500 sound with:
WARP 1260
Re: Guide 1260
Network
PCMCIA
While waiting for the WiFi driver, we can use the PCMCIA port. It can be a card working either onprism2.device or cnet.device . Please note that cnet16.device does not work with Warp 1260.
In order to use a PCMCIA card, you have to switch your Warp into the A1200 IDE mode. This is how it's done (in some casessetpatch might be needed to execute before the following):
stack 16384
warptool idemode=a1200
Plipbox
It is the cheapest and easily available parallel port device. It works with Warps and can be powered by one of its USBs. Its disadvantage is slow transfer. Nevertheless, it gives you network access, so if you can't get a PCMCIA card this is a reasonable option.
PCMCIA
While waiting for the WiFi driver, we can use the PCMCIA port. It can be a card working either on
In order to use a PCMCIA card, you have to switch your Warp into the A1200 IDE mode. This is how it's done (in some cases
warptool idemode=a1200
Plipbox
It is the cheapest and easily available parallel port device. It works with Warps and can be powered by one of its USBs. Its disadvantage is slow transfer. Nevertheless, it gives you network access, so if you can't get a PCMCIA card this is a reasonable option.