Aged Code Studio

BSzili wrote: ↑Tue Aug 30, 2022 5:44 am If you have a cartridge-style iComp PSU be careful, as the connector can't seem to handle the current drawn by the Warp:
https://twitter.com/chainq/status/1563992002815053831
Those wires look pretty thin too, I bet they heat up under load

WOW

BSzili wrote: ↑Tue Aug 16, 2022 7:31 am (...) I might fiddle with the 5V adjustment pot later to increase it just to be safe.

Yes but keep in mind that while changing the 5 V line in that Meanwhile you're changing 12 V as well. So it's advisable to measure both lines to make sure the other one doesn't exceed the nominal value.

Network PCMCIA While waiting for the WiFi driver, we can use the PCMCIA port. It can be a card working either on prism2.device or cnet.device . Please note that cnet16.device does not work with Warp 1260. In order to use a PCMCIA card, you have to switch your Warp into the A1200 IDE mode. This is h...

Questions & Answers Warp card has a battery. What is it for? This battery is not an RTC as we know it from other turbo cards. This battery holds up the memory of the selected kickstart (if the J2 jumper is on, Warp redirects Amiga access from the on-board kick ROM to the one programmed on Warp....

Regardless of the power supply you have, there is a simple mod that can increase the 5 V line a bit by shortening the power cable. Here is an example on a Commodore 4.5 A PSU: http://agedcode.com/images/Amiga_PSU_4.5A_Power_cords.png The result will certainly depend on the power supply. The second i...

Simply put, the one that lets the Warp work stable. Whatever the brand you'll choose it has to be at least 4 Amp on the 5 V line. Commodore 4.5 A Now, some are very happy with the original Commodore 4.5 A version. It's quite difficult to get because there weren't many produced back then. But they gi...

This card is publicly not available. There are two prototypes. Prototype 1: http://agedcode.com/images/Warp 540 Prototype 1.jpg Prototype 2: http://agedcode.com/images/Warp 540 in an A2000.jpg All tests are made on the second prototype which is very similar to the final version of the Warp 560. Pres...

WARP CDTV-60

• 

• 

WARP 4060

•