Search found 20 matches

by WarpGuyde
Tue Aug 30, 2022 10:00 am
Forum: General
Topic: What PSU for Warp?
Replies: 7
Views: 3322

Re: What PSU for Warp?

BSzili wrote: Tue Aug 30, 2022 5:44 am If you have a cartridge-style iComp PSU be careful, as the connector can't seem to handle the current drawn by the Warp:
https://twitter.com/chainq/status/1563992002815053831
Those wires look pretty thin too, I bet they heat up under load :shock:
WOW :shock:
by WarpGuyde
Tue Aug 16, 2022 5:55 pm
Forum: General
Topic: What PSU for Warp?
Replies: 7
Views: 3322

Re: What PSU for Warp?

BSzili wrote: Tue Aug 16, 2022 7:31 am (...) I might fiddle with the 5V adjustment pot later to increase it just to be safe.
Yes but keep in mind that while changing the 5 V line in that Meanwhile you're changing 12 V as well. So it's advisable to measure both lines to make sure the other one doesn't exceed the nominal value.
by WarpGuyde
Mon Aug 08, 2022 12:59 pm
Forum: Warp 1260
Topic: Guide 1260
Replies: 1
Views: 2139

Re: Guide 1260

Network PCMCIA While waiting for the WiFi driver, we can use the PCMCIA port. It can be a card working either on prism2.device or cnet.device . Please note that cnet16.device does not work with Warp 1260. In order to use a PCMCIA card, you have to switch your Warp into the A1200 IDE mode. This is h...
by WarpGuyde
Fri Aug 05, 2022 9:28 am
Forum: General
Topic: Guide
Replies: 1
Views: 2535

Re: Guide

Questions & Answers Warp card has a battery. What is it for? This battery is not an RTC as we know it from other turbo cards. This battery holds up the memory of the selected kickstart (if the J2 jumper is on, Warp redirects Amiga access from the on-board kick ROM to the one programmed on Warp....
by WarpGuyde
Wed Aug 03, 2022 4:16 pm
Forum: General
Topic: What PSU for Warp?
Replies: 7
Views: 3322

Re: What PSU for Warp?

Regardless of the power supply you have, there is a simple mod that can increase the 5 V line a bit by shortening the power cable. Here is an example on a Commodore 4.5 A PSU: http://agedcode.com/images/Amiga_PSU_4.5A_Power_cords.png The result will certainly depend on the power supply. The second i...
by WarpGuyde
Tue Aug 02, 2022 6:51 pm
Forum: General
Topic: What PSU for Warp?
Replies: 7
Views: 3322

What PSU for Warp?

Simply put, the one that lets the Warp work stable. Whatever the brand you'll choose it has to be at least 4 Amp on the 5 V line. Commodore 4.5 A Now, some are very happy with the original Commodore 4.5 A version. It's quite difficult to get because there weren't many produced back then. But they gi...
by WarpGuyde
Tue Aug 02, 2022 2:41 pm
Forum: Warp 540
Topic: What the Warp 540 looks like
Replies: 0
Views: 4007

What the Warp 540 looks like

This card is publicly not available. There are two prototypes. Prototype 1: http://agedcode.com/images/Warp 540 Prototype 1.jpg Prototype 2: http://agedcode.com/images/Warp 540 in an A2000.jpg All tests are made on the second prototype which is very similar to the final version of the Warp 560. Pres...
by WarpGuyde
Tue Aug 02, 2022 2:35 pm
Forum: Warp 1240
Topic: What the Warp 1240 looks like
Replies: 0
Views: 4023

What the Warp 1240 looks like

Image Image
by WarpGuyde
Tue Aug 02, 2022 2:33 pm
Forum: Warp CDTV
Topic: What the Warp CDTV-60 looks like
Replies: 0
Views: 3900

What the Warp CDTV-60 looks like

WARP CDTV-60
  • Image
  • Image
by WarpGuyde
Tue Aug 02, 2022 2:26 pm
Forum: Warp 4060
Topic: What the Warp 4060 looks like
Replies: 0
Views: 4482

What the Warp 4060 looks like

WARP 4060
  • Image